Blog

A loud furnace isn’t just disruptive — it’s often a red flag, indicating a serious problem. Grinding, rattling, and similar noises are commonly associated with worn furnace bearings or belts. Recognizing these sounds and signs early enables you to troubleshoot your noisy furnace and know when to call Express Plumbing for assistance. Common Causes of a Loud Furnace A loud furnace can signal several underlying issues. Worn bearings and belts are among the most common noises that require attention, but other furnace problems may also create abnormal sounds. Worn bearings The blower motor powers the blower fan and circulates air through the system and your home. When the bearings are in good condition, they help the motor run more efficiently and support airflow throughout the system and your home. Worn bearings can cause excessive vibration, which likewise wears on other components and results in excessive and abnormal noise, such as grinding or whining from the motor. Worn bearings typically result from several causes, such as: Insufficient lubrication: Bearings require lubrication to reduce friction — if they become dry, they wear out more quickly. Dirt and debris: Dust and debris can accumulate and lead to grinding or seized bearings.  Old age:

Modern furnaces have several safety mechanisms that ensure they work safely while warming your home during the chilly winter months. The reset button is one of the most important, popping out whenever a problem, like an interrupted gas supply, empty oil tank, or overheating, occurs. Understanding how the reset button works can help you identify serious issues within your furnace and discover when to call for professional help. Keep reading to learn more about the function of the reset button and signs it might be time to upgrade your furnace. What Is a Furnace Reset Button? The reset button is a critical safety feature that protects your furnace from overheating. It works with the furnace’s limit switch, which measures the temperature inside the furnace and air handler, where the blower fan operates. If the temperature of either the blower fan or the furnace rises above a set level, the limit switch will immediately trigger the reset button to shut down the furnace. This safety feature protects the furnace from heat damage. If the heating system continued running when it was too hot, it could quickly melt the electrical wiring and damage various components. Electrical issues that cause a furnace safety

Snow and below-freezing temperatures are common in Caldwell, ID during the winter, so having a heater you can rely on is key during this frigid time of year. A combustion chamber is a key component that produces heat and is a critical part of many heating systems. Combustion chamber problems in heaters can be as simple as a one-appointment repair but bigger issues often require an entire heater replacement. Learn more about these common issues, their impact, and when a total heater replacement is necessary. What is a Combustion Chamber and Why Does it Matter? So, what exactly is a combustion chamber, and why is it important? This heater component mixes fuel (usually natural gas) with air and ignites to produce heat, which then transfers to the air flowing through your system. This part of the heating system is crucial since it’s where all of the heat is created to keep your home warm. A properly working combustion chamber helps to provide safe, energy efficient heating to your home. However, a damaged combustion chamber can have a significant impact on overall heater functionality. It’s important to understand common problems with this component, the warning signs of a faulty combustion chamber,

A control board failure is a major furnace problem. It may require replacing the appliance, depending on the unit’s age and the severity of damage. The things to do when your heater won’t turn on won’t help if the furnace control board has gone bad. If it’s not fixed, the entire system can malfunction.  When you have a faulty control board, performance issues, particularly with the fans and burners, can occur. We’ll look at what this component does and when it’s time to repair it or schedule a furnace replacement. Understanding Your Furnace’s Control Board The control board is an electronic circuit board located inside your furnace. There are two common types; these include a simple ignition furnace control board, which is found in older models and controls the igniter, flame sensor, and gas valve (it’s installed alongside the fan control board). It’s less expensive and easier to install than an integrated control board, which, integrates fan and ignition control in modern furnaces and works more efficiently. Where the Control Board Is Located The control board is located inside the furnace’s control panel. You can find it behind the front panel at the bottom of the appliance (check the manual

A furnace ignition problem can cause you to have no heat. Fortunately, furnace ignitors can be repaired or replaced to restore the spark and get your heating system working again. Ignitors aren’t difficult to replace, but your heater and its ignition system are complex. Let’s look at signs of your furnace not igniting, how to troubleshoot the issue, and why you should hire a qualified heating contractor for repairs. Understanding Your Furnace’s Ignition System If you have a combustion furnace, it uses an ignition system to light the burners. These burners produce heat. When your furnace is not heating your home, an ignitor malfunction is a possible cause.  There are different types of ignition systems. Each works a little differently but has the same purpose. The ignitor in your heating unit may be one of the following: Standing Pilot Light: Found only in older furnaces, a standing pilot light remains on while the furnace is running. Its flame ignites the burners, but since it always stays on, it wastes energy. Intermittent Pilot Light: The pilot light turns on only if the burners need to be ignited. When signaled by the thermostat, an electronic ignitor produces a spark that lights the

If your furnace has a cracked heat exchanger, it must be replaced. Even the best furnace repair service in Boise will tell you installing a new heater is the only option. The heat exchanger is a complex and expensive component. A damaged one is an immediate safety hazard and attempting heat exchanger replacement is risky and cost-prohibitive. We’ll look at how a heat exchanger works, ways to know it’s cracked, and why it requires furnace replacement by our experienced heating installation contractors. Understanding Your Furnace’s Heat Exchanger The heat exchanger is a metal casing containing tubes and coils. Inside it, heat is generated and transferred from one source to another. Air is moved by a blower around the heat exchanger. As it flows around the metal, it collects heat from the coils, warms up, and is blown into your home’s ventilation system. Meanwhile, combustion gasses are funneled into an exhaust pipe and vented outside. Danger Signs of a Cracked Heat Exchanger  Heat is created in a sealed chamber. An airtight seal also prevents harmful gasses from escaping. Therefore, a heat exchanger crack can cause your furnace to malfunction. Numerous signs can indicate a heat exchanger failure, including the following: No